Overview

    • Level   X

    Ambit-Ubee DDW3611 (U10C045)


    Login Information

    • Default Gateway - 192.168.0.1
    • Username - user
    • Password - user

    How To Find Wireless Passphrase (WPA/WEP)

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Wireless from the menu at the top.
    6. Select Primary Network from the menu on the left.
    7. Select the check box that says show characters.
    8. Verify the password displayed.

     

    Changing Wireless Security Type/ Disabling Wireless Security

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Wireless from the menu at the top.
    6. Select Primary Network from the menu on the left.
    7. Enable the desired security type. (WPA-PSK, WPA2-PSK)
    8. To turn off the security select Disable for all the security types.

     

    DMZ

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Gateway from the menu across the top.
    6. Select DMZ Host from the menu on the left.
    7. Enter IP address of the Xbox in the DMZ address box.
    8. Select Apply. 

    Disable DMZ

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Gateway from the menu across the top.
    6. Select DMZ Host from the menu on the left.
    7. Enter a 0 in the DMZ address box. (if 0 is not allowed use 1)
    8. Select Apply.

     

    DHCP Reservation

    (Note: You MUST force release of the IP address on the DHCP page First)

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Gateway from the menu at the top.
    6. Select "Gateway" across the top.
    7. Select "Static Lease" on the left.
    8. Enter in the Mac and IP addresses for the Xbox.
    9. Select the Enable Check box to the right.
    10. Select Apply.

     

    Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Gateway from the menu across the top.
    6. Select Port Forwarding from the menu on the left.
    7. Enter IP address of the Xbox.
    8. Enter the internal Port Number 3074.
    9. Enter the Ext. Start Port Number 3074.
    10. Enter the Ext. End Port Number 3074.
    11. Set the protocol to both.
    12. Select Apply.

    Disable Port Forwarding

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Gateway from the menu across the top.
    6. Select Port Forwarding from the menu on the left.
    7. Uncheck the Enable box of the ports you want to remove.
    8. Select Apply.

     

    Firewall

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. From the menu across the top select Firewall.
    6. Select Content Filter from the menu on the left.
    7. Un-check IP-Flood detection and Firewall Protection.
    8. Select Apply.

     

    Restore Defaults

    Through firmware

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Tools from the menu at the top.
    6. Select Yes for both Restore Defaults and Reset The System.
    7. Select Apply.

    Through Hardware

    1. Locate the reset button on the back of the device (it is labeled "Reset").
    2. Hold the reset button for 30 seconds.

     

    How to Change Wireless Mode

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Wireless from the menu at the top.
    6. Select Radio from the menu on the left.
    7. Select G-Only mode from 802.11 n-Mode drop down menu.
    8. Select Apply.

     

    How to Change Wireless Channel

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Wireless from the menu at the top.
    6. Select Radio from the menu on the left.
    7. From the Control Channel drop down select the desired wireless channel. (Channels 1,3,9,11)
    8. Select Apply.

     

    UPnP

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Select Gateway from the top menu.
    6. Select Options under the advanced section of the menu on the left.
    7. Toggle the UPnP option and select apply. 

     

    Updating Firmware

    *Firmware updates are installed automatically by the Internet Service Provider.*

    How to Find Firmware Version

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Before logging in the firmware version is located here labeled Software Version.

     

    Bridging Guide

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Enter http://192.168.0.1/TlModeChange.asp
    6. Change the mode to Bridge Mode.
    7. Click the Apply button.

     

    MAC Filter

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Click "Gateway" across the top.
    6. On the left had side click "MAC Filtering".
    7. If the Xbox is on this list put a check in the Clear box and select Apply.

     

    Multiple Console Support

    Unconfirmed no

    *Because it may not consistently work without NAT issues* 

     

    How to Find SSID(Network Name)

    1. Open a web browser.
    2. Enter http://192.168.0.1 in the address bar.
    3. Select login from the side menu.
    4. Enter the username and password. (user/user)
    5. Click "Wireless" across the top.
    6. On the left had side click "Primary Network".
    7. The SSID is on this page labeled Network Name (SSID).

     

    Known Issues

    This device will give NAT-like issues, random disconnections and in-game errors (such as "Call of Duty Servers Unavailable") while IP Flood Detection and Firewall Protection are enabled.  Try disabling one or both to resolve the issue.

    • Level   2

    FIREWALL protection disabling worked for me! thank you so damn much! OMG!

    COXBL VIVA LA COALITION! (former Cardinal of Church)