Wireless Security

    • Level   X

    Gemtek WIXFBR-131

     


    Login Information

    Gateway - http://clearmodem

    Username - <blank>

    Password - admin


     

    Wireless Security

    How To Find Wireless Passphrase (WPA/WEP)

    1. Connect your computer via ethernet cable to the device.
    2. Open a web browser and type http://clearmodem into the address bar, press enter.
    3. When prompted enter the password: admin.
    4. Select Wi-Fi Settings from the menu on the left.
    5. Select Basic from the Sub-Menu.
    6. Verify the Wi-Fi Password.

     

    Changing Wireless Security Type/ Disabling Wireless Security

    1. Connect your computer via ethernet cable to the device.
    2. Open a web browser and type http://clearmodem into the address bar, press enter.
    3. When prompted enter the password: admin.
    4. Select Wi-Fi Settings from the menu on the left.
    5. Select Basic from the Sub-Menu.
    6. Using the Authentication drop down select your desired security type.
    7. Shared is WEP, If WEP is selected use the Encryption drop down to select 64-bit or 128-bit.
    8. If WPA-Personal is selected, select the WPA Mode (Auto, WPA or WPA2) and the Cipher Type (TKIP, AES or Both).  WPA2 with AES is recommended.
    9. If WEP security is selected the password will need to be 10 charecters in length (if 64-bit) or 26 characters in length (if 128-bit) and can only use 0-9 and A-F.
    10. If WPA or WPA2 was selected the password can be between 8-63 characters, is case sensitive and can use any character on your keyboard.
    11. Enter the Pre-Shared Key or WEP Key.
    12. Select apply. 
     

     

     Ψ