Username - admin
Password - admin
Gateway - 192.168.1.1
*Note* If Cisco Connect was used to configure the router then there are several other options for logging in.
One method is to use Cisco Connect again. To use this, you will have to search for in All Programs in the Start Menu on the computer that you installed the Cisco Connect Software on.
Once the program has started, click where it says change in the section labeled "Router Settings". Your network name and password are listed on the left in the section titled Personalize. From here you can update this information should you choose to by clicking on change.
The second method is through a web based utility that you can access through Cisco Connect. To access the web based utility, Choose router settings from the main Cisco Connect menu. Then from the section on the right, click on Advanced Settings. There will be a warning that will come up, telling you that this web utility is for expert use only. Click “OK” on this screen.
How to Find SSID (Network Name)
Changing Wireless Security Type/ Disabling Wireless Security
Change Wireless Channel
Change Wireless Mode
Change Wireless Band (Frequency)
Disable Port Forwarding
How to Find Firmware Version
Restore Factory Defaults
Through Web Interface
Multiple Console Support
We have confirmed that this network device is unable to support more than one console with an Open NAT.
There are no known issues for this device
Click here to go to a manual for this device